The potential of PR and PC pins of VICOR power supply may rise to the potential of positive input pins.
This situation will greatly damage all converters and any circuits connected at both ends.
The fuse should not be placed in an area with high ambient degrees Celsius, as this will reduce the rated current of the fuse.
Heat and voltage hazard Vicor power element products shall be protected by an enclosure. VICOR DC-
The DC converter works efficiently within the rated substrate degree Celsius, which may cause damage if directly contacted.
The VICOR power multiplier module requires only local induction.
Each VICOR power supply module in the parallel array should be bypassed appropriately.